Follow @slikkfitness on Facebook, Instagram, Twitter, and TikTok for more
by Ellington Darden, Ph.D.
M3 Pure Muscle is a strategy for training muscles while fully pumped with growth nutrients. The system’s three repetition layers and specialized workout fuel potentiate muscle volume and protein synthesis for rapid hypertrophy.
There are two fundamental requirements to do the program:
Be mentally tough and physically conditioned to withstand the required intensity and volume.
Use the Surge dosing protocol to pump your muscles with the necessary growth nutrients for the system to work as planned.
The material in this plan is for informational purposes only and is not intended as a substitute for the advice and care of your physician. As with all new exercise regimens, consult with your physician to make sure it is appropriate to your individual circumstances before following the concept described in this material. The author and publisher expressly disclaim responsibility for any adverse effects resulting from the use or application of the information contained herein.
© 2022 by Ellington Darden, Ph.D. and T Nation LLC
Workout Instructions
Each workout covers four body parts. A body-part block takes approximately 5 minutes to complete. With the suggested rest, each workout requires 25 minutes or less. Perform the workouts every other day (MWF or TTS) with two days off after three sessions.
Three 2-Week Phases: 18 Workouts
The plan includes three training phases. Each phase consists of six workouts (a total of 18 over 6 weeks) and uses the same body blocks but in a different order.
Body-Part Blocks
Legs
Chest
Biceps
Thighs
Shoulders
Triceps
Calves
Lats
Forearms
Abdominal Work
If you feel like you need abdominal exercises during your workout, we recommend doing them as a warmup before your scheduled session. Then, do the appropriate Surge workout.
Here are some of the best midsection exercises:
Trunk curl on floor
Reverse trunk curl on floor
Side bend with dumbbell
Prone back raise on bench
Leg raise
Various ab machines
Rep Performance
The program includes fast and slow reps. Regardless of the speed, move smoothly and avoid impact in the top and bottom positions. Explosive movements are safe when done correctly. So focus on feeling the muscles contracting and un-contracting while the joints move. Accelerate smoothly and carefully.
Loaded Stretch/Hold
Loaded stretches are major growth stimulators, so learn to do them well. For loaded stretches, hold a bottom position that feels safe. For pull-ups, most people can safely hang in a full stretch. For bench press, protect the shoulders with a hold that’s a little less than a full stretch. It’s a simple rule: Always be and feel safe, or don’t do it.
Going to Failure
Don’t go to failure. Going to failure overtaxes the nervous system for no benefit. It depletes CNS (central nervous system) reserves and limits the amount of continued mechanical muscle-fiber stimulation. When in doubt, go lighter.
Weight Selection
You want to create layers of effects in targeted muscles. To do that, you have to avoid excessive fatigue to keep the muscles performing during each phase (set).
The correct resistance falls within about a 20-percent range. The best way to describe it is, you’ll know when the weight is too heavy or too light – so if it’s not too heavy or too light, it’s just right.
Reduce the weight a little if you’re getting anywhere close to failure. In contrast, add a little weight if you’re not feeling the resistance working.
Pump Layer
Think continuous pumping movement.
Select a weight that allows for laser concentration and optimal feel.
Use smooth, rhythmic reps, going about one second up and one second down for most exercises
Take no pauses in the top and bottom positions.
Turn around right before lockout on pressing movements (locking out takes too much load off the muscles).
Don’t slow down as the muscles pump up and the set progresses.
Afterward, rest the involved body part for 1-2 minutes and allow the muscles to engorge fully. Then, move quickly to the Stimulate Phase.
Stimulate Layer
Standard Stimulate Method
Again, select a weight that allows for laser concentration and optimal feel. Use this rep style:
Stretch/Hold Bottom for 10 Seconds: Start the first rep in the bottom position with a 10-second stretch/hold. Make sure to breathe during the hold.
Launch to the Top Position: Ease out of the bottom stretch and launch the resistance with force to the top (activating the fast-twitch fibers). Don’t throw the weight. Be quick, but then slow down toward the top.
Slow Down the Last-Half Negative: Lower in about one second from the top to the halfway point, where you slow down and take 5 seconds to lower to the bottom stretch.
Stretch/Hold Bottom Briefly: Stretch/hold the bottom position for about one second before you ease into the launch of the next rep.
Repeat Steps 2-4 for 8-10 reps.
End Like You Began: End the last rep with a 10-second stretch/hold in the bottom position (like you did on the first rep).
Afterward, rest the involved body part for 1-2 minutes and allow the muscles to engorge fully. Then, move quickly to the Flutter Phase.
30-10-30 Stimulate Method
One of my most effective Stimulate methods is called 30-10- 30, which involves doing two 30-second negatives, in a certain way, with 10 optimized reps between them. If done correctly, 30-10-30 triggers HUGE improvements in your training gains.
The First 30-Second Negative
Lift the weight into the contracted position (for most exercises) in preparation for the first negative rep.
Squeeze the contracted muscles in the fully secured contracted position, and begin the 30-second negative.
Keep the movement smooth and deliberate, thinking about nothing but slowly un-contracting muscle.
Glance at a wall clock or something in easy view to manage time.
Don’t get distracted with timekeeping. Your primary goal is feeling and visualizing the muscle working.
The Last Half of the Negative Is More Important
I’ve found that the last half of a negative rep becomes increasingly important as you move into the stretched position. I recommend taking 10 seconds for the first half and 20 seconds to complete the last half of the negative rep. At the stretched position, perform an exquisite — smooth — turnaround to begin your first optimal positive rep.
10 Optimal Positive Reps
Coming out of the bottom position of your first 30-second negative, here’s what you do:
Increase smoothly the movement speed so that you’re at a tempo of one second up (positive) and two seconds down (negative) for all 10 reps.
Focus on putting your mind in the middle of exquisitely smooth, rhythmic muscle contractions and un-contractions. The goal is to fill the working muscles with blood and nutrients while fatiguing the fibers.
Nail the 10th rep with plenty of capacity left to squeeze the contracting muscles in preparation for the most important rep — the finishing 30-second negative.
The Second 30-Second Negative
Doing a 30-second negative on an optimally fatigued and nutrient-loaded muscle is the whole point of the preceding 10 repetitions.
Keep that purpose in mind to motivate you to perform the last perfect, intensely painful negative rep.
Be mindful of the working muscles and savor the feeling.
Slow down the last half of the rep, taking 20 seconds to move into the stretched position, where you end the movement by gently landing at the endpoint and relaxing the working muscles.
30-10-30 Lex Extension Demo
T Nation member pfit9 does a 30-10-30 leg extension set:
1-1/2 Stimulate Rep Method
The 1-1/2 Stimulate method is a rep cycle consisting of a one-half rep followed by a full rep. Do 5 rep cycles in a set using the following instructions:
Description
RepCyclePhase
Seconds
1
Hold in the stretched position for 1 second.
Hold
1
2
Lift to the halfway position in 1 second.
Positive
1
3
Hold at the halfway position for 1 second.
Hold
1
4
Lower to the stretched position in 3 seconds.
Negative
3
5
Hold in the stretched position for 1 second.
Hold
1
6
Do a full positive rep in 2 seconds.
Positive
2
7
Hold in the contracted position for 1 second (squeeze).
Hold
1
8
Do the first half negative in 2 seconds.
Negative
2
9
Do the second half negative in 3 seconds.
Negative
3
Total Seconds Per Rep Cycle
15
Rep-Cycle Information
Total Rep Cycles
5
Total Seconds Per Set
75 seconds
Total Exploited Negatives
15 negatives
Total Holds
15 holds
Flutter Layer
Flutter reps activate fast-twitch fibers while further increasing the pump. This is the block’s last phase, so stay focused. Take some time to experiment to get the feel of this technique.
Use Lighter Weight: The weight needs to be light enough to do midrange flutters for about 20 seconds.
Set Up in Midrange Position: You’re going to do a burst of quick finisher reps in the midrange, traveling only about 4-8 inches (depending upon the exercise).
Take Advantage of Stretch Reflex: The stretch-reflex effect plays a role when bouncing up and down in the mid position of a calf-raise finisher (flutter) set. Most of us have seen or done that. The action loop is a controlled drop, followed by a reflex-assisted launch, followed by a controlled drop.
End When Performance Slows: Flutter reps, done correctly, should feel automatic and almost effortless. Continue until you begin to slow down naturally, usually after 20 seconds, when you end the set.
At the end of the Flutter phase, you should feel a growth-stimulating super-pump that can last long after the workout ends. Rest 60 seconds before the next body-part block.
Surge® Workout Fuel
I saved Surge Workout Fuel for the end because I want to leave you with a lasting impression of its importance. Saying your results are dependent on Surge Workout Fuel is an understatement – and that assessment is based solely on my personal and professional experience.
I wouldn’t have and couldn’t have developed my Pump Stimulate & Flutter training system without Surge Workout Fuel.
Pumping a muscle with supraphysiologic levels of blood filled with agents that stimulate intracellular growth signaling and protein synthesis, optimize intracellular pH, sustain boosted nitric oxide, and markedly extend work capacity and performance is beyond my educated comprehension.
And Surge Workout Fuel does all of that and more. But I had to experience these effects to fully appreciate and understand the impact on training and building muscle.
To give insight on what to expect from Surge Workout Fuel and to show how much I depend on it, here’s what Tim Patterson says about it:
Tim Patterson Describes Surge Workout Fuel Effects
Biotest doesn’t make supplements for the general fitness market. Our sole focus is on providing competitive advantages to elite athletes, first responders, battle-ready soldiers, and those whose lives and careers depend on their bodies performing beyond their known limits.
Each ingredient in Surge Workout Fuel is well-thought-out, competitively tested, and included for a distinct purpose.For example, a while ago, we discovered with our athletes that BCAAs didn’t work well and that L-leucine is the critical amino acid triggering protein synthesis. Later we were proved correct. Our exact dosing is in the Surge formula.
We had numerous conversations with the premiere beta-alanine research scientist, Dr. Jeffrey Stout, about dosing. Finding it was a cumulative process requiring 179 grams loaded over several months, we developed the full dosing protocol that delivers optimal performance, and that’s in Surge Workout Fuel.
Even the electrolytes we use in Surge Workout Fuel were tested in competitive cyclists in the summer heat at high altitude. These athletes were losing about six pounds of water from training. We kept the cyclists optimally hydrated and coming in from training at or slightly above starting weight.
You simply can’t out-train Surge Workout Fuel. You’ll gain muscle faster, significantly increase work capacity, sustain intensity levels, recover quicker, and virtually eliminate soreness. And the difference will be amazing.
Tim is right, Surge Workout Fuel does work better than he promised. And the best thing I can think to do is to deliver the same challenge to you.
I’ve designed a training system that takes full advantage of the Surge phenomenon, and you’re getting it all for free with no strings attached other than doing the plan and reporting your experience.
Surge® Workout Fuel Dosing and Mixing Instructions
You’ll need a Surge Base Kit to do the program effectively and gain the most. Pumping muscles with the Surge formula stimulates intracellular growth signaling and protein synthesis, optimizes intracellular pH, sustains boosted nitric oxide, and markedly enhances work capacity and performance.
A Surge dose before and during the workout creates a reactive pump that enables your muscles to train beyond experienced limits. It fuels gains, speeds recovery, and burns fat. You can’t do Metcon for Muscle without it.
Dose Size
Mix 1 scoop in 600-1000 mL of water.
Workout-Day Schedule
Dose 1: Completely consume exactly 20 minutes before training.
Dose 2: Drink throughout the workout and afterward if you’ve not finished during training.
Dose 3: Drink one hour before bedtime (optional).
Off-Day Schedule
Mix 1 scoop in 1800 mL of water and drink throughout the day.
Mixing Instructions
This short video (50 seconds) shows how to properly mix Surge® Workout Fuel:
Three Lifestyle Habits for New Muscle
We don’t want to overcomplicate nutrition and health suggestions. From our experience, keeping it simple and focusing on the important ideas works best when building new muscle.
Here are our three simple habits:
Keep your nutrient-dense foods between 3500 and 4000 calories per day.
Stay hydrated throughout the day with plenty of cold water.
Sleep at least 9 hours each night if you can.
If you want to discuss these topics further, drop your questions in the forum.
Here’s what we need from you:
Keep a detailed Training Log. Post records, notes, and updates about your workouts, size and weight measurements, super-pump and progress photos, and observations.
Share and Discuss Your Progress Openly. Keep posting updates in the Surge Challenge thread. It’s the one place everyone can follow. Even though the topic is closed to outsider posts, it’s open to all observers.
Be “Awake” During Your Experience
When I look back at the last 60 years of my muscle-building quest, I have a priceless treasure of experiences. And we’re committed to delivering the same kind of old-school experience to you.
Challenge us to deliver the best training experience of your life by asking us questions and posting comments, photos, and updates.
Working out the kinks to get you the same results we see and expect is what we do.
PARTS
The plan comprises six-week parts consisting of 3 two-week training phases.
Each part repeats the same 3 training phases using a different Stimulate rep method.
Part
Stimulate
Instructions
1
Standard
2
30-10-30
M/7: add 30-sec neg chin at endW/11: add 30-sec neg dip at endW/14: add 45-sec neg chin at endF/18: add 45-sec neg dip at end
3
1-1/2
PHASE 1
M/1
W/2
F/3
Thighs
Shoulders
Chest
Lats
Lats
Biceps
Triceps
Biceps
Triceps
Forearms
Calves
Legs
M/4
W/5
F/6
Triceps
Legs
Thighs
Lats
Chest
Shoulders
Forearms
Biceps
Calves
Calves
Foreamrs
Chest
PHASE 2
M/7
W/8
F/9
Biceps
Shoulders
Lats
Triceps
Calves
Triceps
Lats
Legs
Biceps
Forearms
Chest
Chest
M/10
W/11
F/12
Thighs
Chest
Legs
Calves
Lats
Calves
Shoulders
Triceps
Shoulders
Biceps
Calves
Biceps
PHASE 3
M/13
W/14
F/15
Thighs
Biceps
Lats
Chest
Triceps
Chest
Lats
Shoulders
Biceps
Forearms
Legs
Calves
M/16
W/17
F/18
Legs
Shoulders
Thighs
Calves
Legs
Lats
Shoulders
Chest
Triceps
Triceps
Forearms
Biceps
LEGS BLOCK
Method
Exercise
Reps
Rest
Pump
Wide-Foot-Pos. Squat
8
10 sec
Pump
Narrow-Foot-Pos. Squat
8
10 sec
Pump
Med-Foot-Pos. Squat
8
1-2 min
Stimulate
Med-Foot-Pos. Squat
10
1-2 min
Flutter
Trap-Bar Squat or Squat or Bodyweight with Bands
20 sec
1-2 min
THIGHS BLOCK
Method
Exercise
Reps
Rest
Pump
Heels-Elevated Squat, Feet/Knees WIde
10
10 sec
Pump
Stiff-Legged Deadlift
8
10 sec
Pump
Heels-Elevated Squat, Feet/Knees Close
10
1-2 min
Stimulate
Goblet Squat
10
10 sec
Stimulate
Hack Squat
10
10 sec
Stimulate
Dumbbell Squat
8
1-2 min
Flutter
Dumbbell Squat
20 sec
1-2 min
CALVES BLOCK
Method
Exercise
Reps
Rest
Pump
Seated Calf Raise
12
10 sec
Pump
Calf Raise Machine
12
10 sec
Pump
Bent-Over Calf Raise
12
1-2 min
Stimulate
DB Farmer’s Walk on Toes
40 steps
10 sec
Stimulate
Calf Raise
12
1-2 min
Flutter
Calf Raise
20 sec.
1-2 min
CHEST BLOCK
Method
Exercise
Reps
Rest
Pump
Barbell Bench Press
10
10 sec
Pump
Dumbbell Bent-Armed Fly or Bands
10
10 sec
Pump
Pushup on Floor
10
1-2 min
Stimulate
Barbell Bench Press
10
1-2 min
Flutter
Barbell Bench Press or Bands
20 sec
1-2 min
SHOULDERS BLOCK
Method
Exercise
Reps
Rest
Pump
Overhand Bar Hang
40 sec
10 sec
Pump
Dumbbell Lateral Raise
10
10 sec
Pump
Dumbbell Upright Row
10
1-2 min
Stimulate
Barbell Overhead Press
10
10 sec
Stimulate
Dumbbell Lateral Raise
10
10 sec
Stimulate
Trap-Bar or DB Farmer’s Walk
40 steps
10 sec
Stimulate
Trap-Bar Shrug
10
1-2 min
Flutter
Dumbbell Lateral Raise
20 sec
1-2 min
LATS BLOCK
BICEPS BLOCK
Method
Exercise
Reps
Rest
Pump
Narrow-Grip Barbell Curl
8
10 sec
Pump
Chin-up
8
10 sec
Pump
Wide-Grip Barbell Curl
8
1-2 min
Stimulate
Dumbbell Zotterman Curl
10
0
Rotate DB to hammer
Stimulate
Dumbbell Hammer Curl
10
0
Rotate DB to regular
Stimulate
Dumbbell Regular Curl
10
1-2 min
Flutter
Dumbbell Regular Curl or Bands
20 sec
1-2 min
TRICEPS BLOCK
Method
Exercise
Reps
Rest
Pump
Triceps Pressdown or Bands
10
10 sec
Pump
Parallel Bar Dip
10
10 sec
Pump
Triceps Pressdown or Bands
8
1-2 min
Stimulate
Overhead Triceps Extension with One Dumbbell
8
0
Decrease wt. 5 lb
Stimulate
Overhead Triceps Extension with One Dumbbell
8
1-2 min
Flutter
Overhead Triceps Extension with One Dumbbell or Band
20 sec
1-2 min
FOREARMS BLOCK
Method
Exercise
Reps
Rest
Pump
Seated Barbell Wrist Curl
10
10 sec
Pump
Reverse Seated Barbell Wrist Curl
10
10 sec
Pump
Standing Reverse Barbell Curl
10
1-2 min
Stimulate
Seated Barbell Wrist Curl
10
1-2 min
Flutter
Seated Barbell Wrist Curl
20 sec
1-2 min
Darden Pullover
Place a medium dumbbell upright on top of a standard bench.
Sit on the floor on one side of the bench near the dumbbell.
Ease your middle back and shoulders over and around the bench. Your feet should be on the floor.
Grab the dumbbell on one end with both hands.
Straighten your elbows and extend the dumbbell over your chest.
Move the dumbbell backward over your face and head into a stretched position for your lats and ribcage.
Arch your middle back carefully around the bench with your feet still on the floor. Feel your ribcage elongate.
Stretch gradually your torso. As you get the hang of the movement, you’ll be able to progressively arch your middle back and lower your hips and thighs for an even greater stretch.
Bring the dumbbell back over your chest.
Continue the stretch-and-contract movement for 8-10 smooth repetitions. On your last repetition, move the dumbbell from over your chest to an upright position on top of the bench.
Reserved
Download the Slikk Fitness app for iOS for more exclusive content